Pay
|
$17.85 - $18.36/hr
Shift
|
2nd shift: 3:00 pm-11:00 pm - $17.65/hour 3rd shift: 11:00 pm-7:00 am (Sun-Thurs) - $18.36/hour
Job Description
Builds, evaluate, and packages components
NO INTERVIEW REQUIRED
Pay
|
$15.00/hr
Shift
|
1st Shift - 5:00 a.m. – 2:30 p.m. Monday – Thursday and 5:00 a.m. – 9:00 a.m. on Friday
Job Description
Assembly following blueprints and other written and verbal specifications
Pay
|
$19 - $21/hr
Shift
|
2nd Shift (will need to train on 1st shift for a few weeks) M-Th 2:30p-11:00p and Friday 9a-5p
Job Description
Set-up and Operate CNC 57 station turret punch press, 14’/150-ton brake press,
13.5’ panel bender/folding machine, 12’ shear, and modify existing CNC programs as required.
Pay
|
$16.50 + BOE plus bonus when eligible.
Shift
|
1st Shift - 5a-2:30p M-Th and 5a-9a Friday
Job Description
Assemble, test and perform quality checks with documentation on all assemblies as required. Follow blueprints and other written and verbal specifications by performing the following duties.
Pay
|
$16.00-$22.00/hr DOE
Shift
|
1st and 2nd Shift available
Job Description
Due to customer demand our Green Bay client is seeking an experienced Industrial Painter to join the Industrial Coatings team. There are first and second shift openings with a top starting pay of up to $22/hr for ideal candidates.
Pay
|
$13 - $14/hr DOE
Shift
|
1st Shift
Job Description
We have an opening for a Quality Assurance Inspector in Green Bay. Experience in a metal working shop would be preferred.
You will inspect, document, photograph and when required, polish finished engravings to ensure compliance with company stated specifications. Starting pay for this first shift opportunity can be as high as $14/hr for the ideal candidate.
Pay
|
$14/hr
Shift
|
1st: 5 a.m. to 1 p.m. 2nd: 1 p.m. to 9 p.m. • Overtime will be required
Job Description
We are seeking helpers for our Powder Coat line to Load/Unload parts. Helpers will hang or remove parts off the paint line. Must be able to lift up to 60lbs and stand all shift. This is a very clean, well lit, climate controlled environment.
Pay
|
$20.00 - $26.00/hr DOE
Shift
|
1st Shift
Job Description
We are seeking an experienced Laser Operator for a Lead role in our Fabrication Department. This person will be hands on running the lasers as needed, training others, etc...
Pay
|
$18.00 to $30.00/hr DOE
Shift
|
1st Shift 6:00 am to 2:30 pm.
Job Description
We are seeking a CNC Machinists to set up and operate Haas and or Milltronix VMC's and/or Lathes. Programming a definite plus especially Haas Conversational programing for the VMC's. The company is a smaller, growing machine shop.
Pay
|
$16.00 to $22.00/hr DOE
Shift
|
1st shift: Four ten hour days Monday through Thursday. Overtime will be worked on Friday with the intent of being gone by lunch (6 am to 11:30 am).
Job Description
We are seeking an Electrical Assembler/Panel Builder with experience wiring machines as well as control panels.
• Electrical assemblers do quite a bit of mechanical assembly as well, and the company counts on them to be cross trained.
Pay
|
$18.50 per hour for 90 days then move to $19.95 (if on 2nd they receive a $1.00 shift premium after the initial 90 days)
Shift
|
Hours: * All are 1st shift to start but both 1st and 2nd shift long term positions are Available • 1st shift 6:00 a.m. to 2:30 p.m. • 2nd shift: 2:00 p.m. to 11:30 p.m. Monday through Thursday and 2:00 to 6:00 p.m. on Friday! OT for 2nd is normally after 6 on Fridays
Job Description
We are seeking sharp, motivated Welders. Ideally seeking individuals with at least 6-12 months of experience and technical school, but will consider recent graduates out of tech school.
• MIG on Mild steel (about 1/4 inch steel) using .030 inch wire
• Additional fabrication skills a definite plus
• will start out as general laborers in the welding area until they test. Will be helping out in the shop that will include other duties as well as some welding.
Pay
|
$20 -$22.50/hr DOE
Shift
|
Hours: * All are 1st shift to start but may transition to 2nd. Must be OK with 2nd shift. • 1st shift 6:00 a.m. to 2:30 p.m. • 2nd shift: 2:00 p.m. to 11:30 p.m. Monday through Thursday and 2:00 to 6:00 p.m. on Friday! - OT for 2nd is normally after 6 on Fridays
Job Description
We are seeking a motivated Electrical Technicians to wire control panels and equipment. Open to new grads out of tech as well as sharp, electrically/mechanically inclined entry level individuals that want to get into this field of work. The ideal candidate will possess manufacturing experience or industrial electrical experience in the assembly and wiring of electrical control systems and equipment.
Pay Rate:
• Start at $20.76 for 90 day contract - Increase to $22.51/hr once hired on. If moved to 2nd receive a $1.00/hr shift premium after 90 days..
Pay
|
$20.00 - $24.000/hr DOE
Shift
|
1st Shift 6:00 am to 2:30 pm. Overtime is available and expected.
Job Description
We are seeking a Welder with MIG & TIG skills. Ideally looking for candidates with at least one year of MIG and TIG welding experience. Most of the work will be welding stainless and mild steel