Here are all the jobs currently open at Argus

Click which Argus location is closest to you below to sort the jobs. Click on the arrow button next to the job to see the full description and apply.

Forklift Operators on a Busline

Milwaukee, WI

$20.00

PM Shift: Forklift Operator (5:30p-4am) • Tues-Friday - 3 Openings • Mon-Thurs - 3 Openings

Forklift Operators need for 10 hour shifts on days and nights.

Team Lead - 2nd or 3rd Shift

Waukesha, WI

$20 - $21/HR.

2nd or 3rd Shift

This position is responsible for overseeing production and packaging of all products per customer/internal specs.

Production Supervisor

Waukesha, WI

$55K - $60K DIRECT HIRE

2nd Shift

This position is responsible for overseeing production and packaging of all products per customer/internal specs.

Maintenance Tech

Waukesha, WI

$28 - $30 DIRECT HIRE

2nd Shift

This person is responsible for the daily minor electrical and mechanical maintenance of all plant equipment.

Palletizer

Waukesha, WI

$15.00

1st shift 5:45am-2:15pm

This position is responsible for the palletizing of finished products per customer and internal specifications.

Bakery Operator

Waukesha, WI

$18.00

3rd Shift

This position is responsible for the baking of all products in the bakery area per the customer and/or internal specifications.

Administrative Assistant

Menomonee Falls

$18/hr

1st

The Administrative Assistant is responsible for general clerical duties including answering and forwarding incoming phone calls, greeting clients, vendors and visitors and performing assigned administrative duties and work assignments.

Assembler

Muskego

$15/hr Every 4 weeks- $0.50 pay increase - Union

1st shift: 6am-2:30pm 2nd shift: 4pm-12:30am

Perform assembly duties to assemble and crate rigid and padded seal and shelter products. Union Shop.

Assembler and Tester

Milwaukee

$16.50+/hr based on experience

1st 5a-2:30p M-Th 5a-9a Friday

Assemble, test and perform quality checks with documentation

Panel Wirer/Assembler

New Berlin

$15 - $25 per hour based on experience

Shift is 6:30am - 3:00pm, 30mins lunch with two paid 15min breaks.

Layout control panel mechanical arrangements using squares, rules, etc. Perform re-work of wiring and assembly at request and guidance of Quality Control technicians

Customer Service Specialist

Mequon

$21 - $23.50 DOE

1st Shift

Job description: Perform a wide variety of duties to process sales orders into the our Business System. Provide product and sales information, order status, availability and pricing to Distributors and customers. Also provide assistance to select proper part/product for their specific repair/ application, to include researching parts manuals and engineering drawings.

Yard Laborer

Germantown

$16 - $17 per hours DOE

1st shift

The Yard Laborer who joins our team will assist in a variety of duties in our precast concrete yard and will have a hard-working and team player attitude! If you like working outdoors year-round, you’ll love this job!

Quality Engineer - Technician

Germantwon

$20 - $25 DOE

1st shift either 5am -2pm or 6am - 3pm

• Must be able to select appropriate measuring tools/ techniques (Know which Gauge to use according to the feature being measured) • Must be able to read and interpret blueprints • They will be performing Audit procedures and processes to ensure compliance with customer requirements • ISO Knowledge • Calibration of measuring devices, tools and equipment

Stock Selector

Jackson

$20.00 per hour

2nd Shift - WORK HOURS: 5:00PM – 3:30AM CST

This is a warehouse position responsible for operating an electric pallet jack, or forklift, to select the correct products, labeling product using our label technology, palletizing product to build customer orders and delivering the product to the dock safely and efficiently. This position requires working 6:00 p.m. until end-of-shift with all products accurately selected and loaded. Overtime hours and working weekends and holidays are required to successfully fill customers' orders. The job requires working in areas with temperature and humidity variations based on local weather conditions, and on selecting the environment (dry, cooler, freezer).

Forklift Driver

Milwaukee

$16.50 + $1 shift premium

3rd shift 5:30p-4a M-Th

Picking and staging of orders Loading and unloading of trucks General shipping and receiving duties

Forklift Operator

Milwaukee

$16.50 + $1.00 Shift Premium

3rd Shift - 5:30p-4a M-Th

Forklift Driver

Shipping Clerk

Menomonee Falls

$15.00 per hour

1st Shift

Pick and process orders to be shipped, ship orders.

Forklift Driver

Milwaukee

$16.50 - Raise to $18.50 after probationary period plus $1.00 night shift premium

Monday-Friday 11p-7a

Forklift Operator

Crater Shipper

Milwaukee

Approximately $16.00 per hour. Possible more for the right candidate that has a good work history, etc. $.50 added for 2nd shift when hired on as company employee.

2nd Shift: M-Th 2:30p-11:00p Friday 9a-5p

Build crates and ship

Light Assembler

Milwaukee

$15.00 - $15.50 DOE

1st Shift

Perform fitting of parts, assemblies, and sub-assemblies within the assembly of product.

General Shop Helper

Germantown

$15.00

1st and 2nd shift

General Shop Helper They will learn all the processes and departments.

Welder

Milwaukee

$16.00 - $24.00 DOE

All Shifts

Mold Setter

Nashotah

$20.00/hr

1st: 6:45am - 3:15pm 2nd: 2:45pm - 11:15pm 3rd: 10:45pm - 7:15am

Mold setters are skilled tradespeople specialized in setting molds for the manufacturing of products or components made of various materials. They are responsible for mixing materials, positioning and aligning molds, and overseeing temperatures and timing necessary for materials to solidify.

Entry Level Machine Operator

Nashotah

$13.75/hr

1st: 6:45am-3:15pm 2nd: 2:45pm-11:15pm 3rd: 10:45pm- 7:15am

Entry Level Machine Operator position. Regularly schedule pay raises once you are offered a position directly. Internal Apprenticeship program.

Miscellaneous Operator - Master Lock

Milwaukee, WI

$15.00

1st Shift = 6:30 am - 2:30 pm 2nd Shift = 2:30 pm - 10:30 pm 3rd Shift = 10:30 pm – 6:30 am

Master Lock hires for Sorters and Machine operators.

Assembly

New Berlin

$15.00 - $15.75

1st shift – 6:00am-2:30pm (M-F), 2nd shift – 2:45pm-11:15pm (M-F), 3rd shift – 9:45pm – 6:15am (Su-Th), some OT may be required on all shifts

Under the direction of production supervision, the Production Assembler builds the highest quality products at the lowest possible cost, meeting company production standards, customer specifications and delivery requirements, in accordance with company policies and procedures.

Assembler Tester

Milwaukee

$16.50 + BOE plus bonus when eligible.

1st Shift - 5a-2:30p M-Th and 5a-9a Friday

Assemble, test and perform quality checks with documentation on all assemblies as required.

Machine Operator

Mukwonago

$14.50 - $15.95/hr based on shift

1st: 7am – 3pm, $14.50 2nd: 3pm – 11pm, $15.22 3rd: 11pm – 7am Sun – Thur, $15.95

Operate machines per provided work instructions. Perform repetitive operations, according to provided work instructions.

General Fabrication - 2nd Shift

Deforest, WI

$17 - $20/hr.

2nd shift - M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that company's products and services meet or exceed customer expectations.

CNC Press Brake Operator - 2nd shift

Deforest, WI

$17 - $20/Hr.

2nd shift M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that company's products and services meet or exceed customer expectations.

CNC Laser Operator - 2nd Shift

Deforest, WI

$17 - $20/hr.

2nd Shift M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that company’s products and services meet or exceed customer expectations.

Warehouse - 1st and 2nd Shift

Madison, WI

1st - $16 -17+ and 2nd - $17-18+

2 - 1st 7:30am – 4:00pm and 2 - 2nd 1:00pm – 9:30pm

1-3 years of previous forklift driving experience and some RF Scanning experience.

Maintenance Tech - 3 Needed

Madison, WI

DOE up to $30ish

1st Normal 8am – 4:30pm M-F

Applicants must be customer-service driven and be able to handle the daily challenges associated with the property management industry and maintaining multiple residences.

Line Loaders - 1st and 2nd Shift

Oregon, WI

$16/hr-1st and $17/hr-2nd

1st: 5am-3:30pm Monday-Thursday and 2nd M-Th 3:30p – 2a any OT on Fri.

Proactively handles production equipment throughout the powder coating process as specified by job packets efficiently and accurately to achieve the desired quality and quantity of work.

Forklift/Material Handler - 5 Needed

Fitchberg, WI

$20.95 + 1.50 shift = $22.45

2nd shift 2p – 10p M- F

This position works in support of warehouse activities to ensure timely support of the manufacturing process.

General Production Operators - 3 Needed

Sun Prairie, WI

$16.00

2nd 4:30p – 1a

The General Production Operator performs tasks involved in general assembly of printed circuit boards.

Finishing Operator

Sun Prairie, WI

1st Shift: $16 and 2nd Shift: $18

1st Shift: 6a – 6p and 2nd Shift: 6p – 6a

Under the direction of the Finishing Manager/Supervisor, performs operations to customer specifications.

Press Operators

Sun Prairie, WI

$15 - $16

12 Hour Day Shift, 6am-6pm – TTH openings on both ends of the week. 3 days one week, 4 the next at $15/hour and 12 Hour Night Shift 6pm-6am – TTH openings on both ends of the week. 3 days one week, 4 the next at $16/hour.

A challenging career opportunity for first, second, third and fourth press operators in our heat set web press department.

Tool Room - All Shifts

Ixonia, WI

$18 - $24 BOE

1stt Shift

The purpose of this non-supervisory position, located in Ixonia, Wisconsin, is to order, secure, and maintain all instruments and special equipment inventories; to check out all tools as requested and ensure they are returned and stored properly.

Line Loaders

Oregon, WI

$17/hr-1st and $18/hr-2nd

1st: 5am-3:30pm Monday-Thursday and 2nd M-Th 3:30p – 2a any OT on Fri.

Proactively handles production equipment throughout the powder coating process as specified by job packets efficiently and accurately to achieve the desired quality and quantity of work.

Maintenance Tech

Janesville, WI

$30.00

2nd shift 2:30p – 11p

Under limited supervision, the Multi-Craft Maintenance Mechanic A will work in an industrial recycling environment working with process and physical plant equipment. Duties include diagnosing and repairing all mechanical and electrical maintenance issues associated with maintaining production machinery and equipment throughout the Janesville Campus

General Production Operator

Janesville, WI

$17

2nd: 2:30p – 11p

Will be working in numerous production areas within the company.

Maintenance Tech - 3 Needed

Madison, WI

DOE up to $30ish

1st Normal 8am – 4:30pm M-F

The Maintenance Technician will report to the Maintenance Team Leader and will work with the property management and operations teams to ensure that the properties managed by the company are kept up to applicable standards.

Punch Press

Ixonia, WI

$17 - $19

2nd 2pm – 12am M-TH

To ensure that product processed from metal stamping punch presses meet the specifications of the customer.

Warehouse

Madison

1st shift: $16 -17, 2nd Shift: $17-18+

2 on 1st shift: 7:30am – 4:00pm and 2 on - 2nd Shift 1:00pm – 9:30pm

We are looking applicants with a strong work ethic to work in our client's warehouse, someone who doesn't mind hard work and also understands everything we do is to serve and satisfy our customers.

CNC Press Brake Operator

DeForest, WI

$16 - $20 BOE

M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that our products and services meet or exceed customer expectations.

CNC Punch/Laser Operator

DeForest, WI

$16 $20 BOE

M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that our products and services meet or exceed customer expectations.

CNC Laser Operator

DeForest, WI

$16 - $20 BOE

2nd Shift: M-Th 3:55pm to 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that our products and services meet or exceed customer expectations.

Brake Press - 1st or 2nd Shift

Ixonia, WI

$17+ BOE

1st Shift: 6am – 2pm M-F or 2nd Shift: 2pm – 12am M-TH

To ensure that product processed from press brakes meet the specifications of the customer.

Punch Press - Multiple needs (Class A, B, and C Operators)

Ixonia, WI

$17 - $19 BOE

2nd Shift: 2pm – 12am M-TH

To ensure that product processed from metal stamping punch presses meet the specifications of the customer.

De-Nester, Fabrication - Needs 2

Ixionia, WI

$17.00

2nd Shift: 2pm – 12am M-TH

This is essentially popping parts out of a piece of sheet metal after they are laser cut. They will look at entry level people with good mechanical skills that want to get into manufacturing.

Lt. Equipment Operator - 2 Needed

Waupun, WI

$17-$18

1st 7am – 4:30pm M-F

Light Equipment Operator assists in the recycling process by operating a variety of equipment including forklift, grapple cranes, stationary shear, stationary baler, etc.

Lt. Equipment Operator - 2 Needed

Madison, WI

$17-$18

1st Shift: 7am – 4:30pm M-F

Operating equipment such as Bobcat, backhoe, front end loaders, skid steers and forklift. Helping with general yard labor.

Shipping Worker

Elkhorn, WI

$13-18/hr

1st Shift: M-F 8am – 4:30pm

Assist in the activities involved in shipping, material handling, quality inspections of incoming materials, inventory control and other related activities.

CNC Operator - B

Elkhorn, WI

Up to $22/Hr.

6:00 AM – 4:30 PM

As a CNC Tech B, you will be responsible for but not limited to; Setup, operate equipment and perform essential duties to ensure that parts are machined to specifications detailed within customer and internal company blue prints and other process related documentation.

CNC Operator - C (Entry Level)

Elkhorn, WI

Starts at $16.00

6am to 4:30pm

Performs essential duties to ensure that parts are machined to specifications detailed within customer and internal company blue prints and other process related documentation. • Previous manufacturing and machine operating experience is preferred.

Line Worker - Needs 3

Lake Mills, WI

$17.85/hr.

2nd Shift: 3:30pm-1:00am + Overtime (currently working Fridays)

Transfers product from feed belt to in-feed conveyor, packages product into shipping case, weighs packed case to assure net weight is within limits.

Sanitation - Needs 3

Lake Mills, WI

$18.00 to start

Monday-Thursday 8 hour days 10pm-6am (we are working Friday’s right now)

Responsible for assuring that the manufacturing plant is cleaned and that all production lines are cleaned and properly restored for production the next day

Warehouse

Madison, WI

1st Shift: $16 -17+ and 2nd Shift: $17-18+

2 - 1st 7:30am – 4:00pm and 2 - 2nd 1:00pm – 9:30pm

If you have 1-3 years of previous forklift driving experience and interested in gaining some RF Scanning experience, we would be thrilled to learn more about what you could offer.

Maintenance Tech - 2 needed

Janesville, WI

$22 - $34 DOE $1.00 shift premium for 2nd and 3rd shift

2 - 2nd 1pm – 9:30pm

The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment.

Quality Supervisor

Janesville, WI

$25 -30/hr. (DIRECT HIRE OR CONTRAT TO DIRECT)

2nd: 4p 12a (could change slightly)

The Quality Supervisor is responsible for ensuring timely and effective implementation of all company’s policies, procedures, and activities involved in assuring the quality of manufactured products.

Sr. Buyer

Janesville 53546

$70K + boe DIRECT HIRE

1st Flexible between 5am – 8am start then work 8 hrs, M-F

The Buyer is responsible for purchase, specification and/or bid of a wide range of products and commodities.

Machine Operator, need 2-3

Oconomowoc, WI

$22-23

1st 6am – 3:30pm plus OT

CNC Machine Operator experience would be great but not necessary.

Production Supervisor

Madison, WI

$75- 80K per Year

1 or 2 needed on 2nd shift: 1p – 9p M-F, 1 0r 2 needed on 3rd shift: 9p – 5a Sun - Thur

Leads and supervises people and assembly activities to achieve established production goals consistent with standards of quality, safety, cost and housekeeping.

Manufacturing Engineering Tech

Madison, WI

$53K - $57K per year

2 needed on 2nd Shift: 2p – 10p M-F, 2 needed on 3rd Shift : 10p – 6a Sun - Th

This position would be working in a hands-on manufacturing environment where safety & quality are of utmost importance. Individuals in this role can expect to work amongst various disciplines of Engineers, Maintenance and Operations in our manufacturing atmosphere.

Restoration Tech

DeForest, WI

$17-20 Based on experience

1 or 2 needed on 1st: 7:45a – 5p generally

Our technicians respond to both commercial and residential losses due to burst pipes, sprinkler systems going off, mold infestations, fire damage, and much more. In addition, each technician rotates on an On-Call schedule so that we are able to respond to emergency situations at night and on the weekends or when we have severe weather such as flooding, cold snaps and snow storms.

Maintenance Tech (Property) - 3 Needed

Madison, WI

DOE up to $30ish per hour

1st Normal 8am – 4:30pm M-F

We are looking for an experienced maintenance technician to join our team. The company is open to unskilled people as long as they have some mechanical aptitude and can be trained. The Maintenance Technician will report to the Maintenance Team Leader and will work with the property management and operations teams to ensure that the properties managed by the company are kept up to applicable standards. Applicants must be customer-service driven and be able to handle the daily challenges associated with the property management industry and maintaining multiple residences.

Line Loaders

Oregon, WI

$17/hr-1st Shift, $18/hr-2nd Shift

1st: 5am-3:30pm Monday-Thursday, 2nd M-Th 3:30p – 2a, any OT on Fri.

Proactively handles production equipment throughout the powder coating process as specified by job packets efficiently and accurately to achieve the desired quality and quantity of work.

Production Technical

Spring Green, WI

2nd Shift - $18.25, 3rd Shift - $18.50

2nd – 3p -11p, 3rd – 11p – 7a

Perform assignments in accordance with established safety policies and procedures.

Welder

Jefferson, WI

$18 - $19.50 Based on experience

1st: 6:30a 3p

Lays out, fits, and welds fabricated components to assemble structural building frames. Weld.

Grinder Operator/Machine Operator

Janesville, WI

$18.00

3rd 11pm – 7am

The material grind line operator maintains production and distribution of rubber products by delivering materials to the presses through grinding, sifting, and moving particles from trailers and silos.

General Production Operator, Forklift, and Receiving Clerk

Janesville, WI

$15.00

5a – 1:30p

General production work. Operating a forklift and receiving product. 12 – General Production Workers Needed 5 – Forklift Operators needed 1 – Receiving Clerk needed

Finished Goods Line- Machine Operator

Watertown, WI

$15 as temp - $19.65 after hire

1st either 5am – 2pm or 5:30am – 2:30pm, 2nd shift: 5pm – 1:30am, 3rd shift: 9:30p – 6a

Operate and learn different machines/positions on the line.

General Production Operator

Sun Prairie, WI

$16 with Bump on hire

2nd 4:30p – 1a M-F

The General Production Operator performs tasks involved in general assembly of printed circuit boards.

Press Operator / Press Line

Johnson Creek, WI

2nd shift Rutil/Desma – $17.32/hr., 2nd Shift Pressline Rep Op: $19.11/hr., 3rd shift Rutil/Desma – $17.57/hr., 3rd Shift Pressline Rep Op: $19.36/hr.

2nd: 4pm – 12am and 3rd : 12am – 8am

Maintains and operates transfer presses.

Machine Operator

Ixonia, WI

2nd shift: starting @ $18/hr. + 10% shift premium for entry level people 3rd shift: starting at $18/hr. + 10% shift premium for entry level people

2nd and 3rd shift

The machinists are working on CNC Lathes and/or Machining Centers producing a variety of small to large parts.

Assembly/Packaging

Madison, WI

$16 + $2/hr. attendance bonus

1st: 7am – 3:30pm M-F

Assemble foam, corrugated, or wood parts with adhesive, heat or mechanical methods as required.

General and Secondary Machine Operator

Madison, WI

$15.50 + $2hr. attendance bonus – General $16.00 + $2hr attendance bonus – Secondary Operator

1st: 7am – 3:30pm M-F 2nd: 3:30pm – Midnight M-F

Set-up, change over and operate our foam cutting secondary operations machinery such as waterjet cutter, horizontal slitter, hand and vertical profile machines, die cutters and down cutter equipment

Feed Production Operator

Lodi, WI

1st: $18, 2nd & 3rd: $19

1st: 6a – 2p M-F, 2nd: 2p – 10p M-F, 3rd: 10p – 6a Sun – Th

Under general supervision, manufactures and packages product adhering to standard operating procedures (SOP) and other regulatory requirements.

Production Technical

Spring Green, WI

2nd - $18.25 3rd - $18.50

2nd Shift: 3p -11p 3rd Shift: 11p – 7a

Perform assignments in accordance with established safety policies and procedures

Line Loaders

Oregon, WI

$17/hr-1st $18/hr-2nd

1st: 5am-3:30pm Monday-Thursday 2nd M-Th: 3:30p – 2a any OT on Fri.

Proactively handles production equipment throughout the powder coating process as specified by job packets efficiently and accurately to achieve the desired quality and quantity of work.

Finishing Operator

Sun Prairie, WI

1st: $16.00 2nd: $18.00

1st: 6a – 6p 2nd: 6p – 6a They have front half and back half of the week schedules: Front half: Every Mon., Tues., Wed. and every other Sunday Backhalf: Every Thur., Fri., Sat., and every other Sunday

Under the direction of the Finishing Manager/Supervisor, performs operations to customer specifications

Press Operator

Sun Prairie, WI

1st: $17.00 2nd: $18.00

1st: 6a – 6p 2nd: 6p – 6a They have front half and back half of the week schedules: Front half: Every Mon., Tues., Wed. and every other Sunday Backhalf: Every Thur., Fri., Sat., and every other Sunday

Under the direction of the Press Room Manager and First Press Operator, assists in the operation and maintenance of a heat set web press to ensure the production of high-quality printed materials.

Assembler 1

Sun Prairie, WI

2nd shift - $16.01/hr. 3rd shift - $16.78/hr. .25 cent raise when hired

2nd Shift: 3pm-11pm 3rd Shift: 11pm-7am

The Assembler I is responsible for maintaining accuracy, quality, and efficiency while performing light assembly duties and production tasks.

Recruiter for our Madison Office

Madison

Base Salary + Direct hire and Contract Commissions and Monthly Bonus Program

1st shift - 8am - t5pm

We are seeking a full time Recruiter for our Madison Office. Company Overview: Argus Technical has been serving the Milwaukee, Appleton and Madison areas for over 40 years by providing talented skilled trades, technical and engineering resources. We pride ourselves on meeting our client’s personnel needs. Our staff knows the ins and outs of the manufacturing industry, and it’s this tradition of excellence that you can rely on when working with us as an outstanding staffing resource.

Instrumentation/Controls Engineer

Verona, WI

$65k - $100K per year based on experience

1st (8am-4:30pm with some flexibility)

This individual will work with teams of engineers of varied disciplines to provide excellent client service, from the design concept stage through commissioning and job closeout.

Mechanical Engineer

Verona, WI

$75 - $90K salary

8a – 4:30p with some flex

The individual will work with and be mentored by internal team members to ensure the client’s needs for custom equipment are met or exceeded by being an active participant in the machine design process from concept to fabrication. This is accomplished through both a thorough understanding of the client’s budget, schedule and design criteria, as well as proper execution of the Machine Design Group process.

Lead Mechanical Engineer

Verona, WI

$90-120K salary

1st: 8am – 4:30pm

ACS is looking for a Lead Mechanical Engineer to join our team. The Mechanical Engineer will be highly knowledgeable and experienced in Industrial HVAC and Mechanical Systems design, code review and commissioning. The individual will lead design team meetings, develop designs from concept through construction documents for a variety of laboratory, process, and industrial projects.

Machinist

Verona, WI

$17/hr-$20/hr

1st: 7a – 3:30p (can have some flex to start at 6:30)

ACS is seeking a Machinist to assist the manufacturing of custom fabricated equipment in our fabrication facility which is located in Verona, Wisconsin. This candidate will produce parts by setting up previously run jobs, setting up new jobs, and operating a computer numerical control (CNC) machine and or manual machine. All products are produced using appropriate cost-effective machining methods & equipment, careful quality control, and maintaining thorough communication with other coworkers.

Assistant Project Coordinator

Verona, WI

$16.50/hr-$18/hr

1st: 8:00am – 4:30pm

This role will assist Project Coordinators with various administrative tasks and provide backup receptionist coverage. The successful candidate will have a professional demeanor and strong work ethic, strong computer skills and be highly organized and detail oriented.

Quality Technician

Elkhorn

$19/hr-$27/hr based on experience

2nd shift: 3pm - 11pm 3rd shift: 11pm - 7am

Be available to work the hours scheduled for his or her shift. Be capable of reading piece part drawings. Be responsive to a variable workload, and process jobs by their priority. Complete, date and initial all recorded inspection results. Be courteous and as informative as possible to members of other departments. When finding a defect in a submitted part, recheck your findings to be sure the error is not in the measurement. Be familiar with the workflow through a manufacturing plant. Knowledge of the typical quality problems found with each manufacturing operation. Be familiar with a statistical software package.

Crane Operator

Madison

$17/hr-$23/hr

6:30am – 4:30pm (M-F) - With Saturday OT available

Under supervision, operates a magnetic/grappling crane in a facility, unloading or loading trucks, semis, rail cars with material, sorting material in yard.

CNC Machinist

Elkhorn

$17/hr-$25/hr

1st Shift: 7am-3pm (M-F) 2nd Shift: 3pm-11pm (M-F) with OT as needed.

CNC machine operator will produce parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Sheet Metal Worker

Pardeeville

$18.38/hr

2nd: 3pm – 1:30am (M-Th) (OT until 2:30am and/or Fridays) 1st shift only open to those working on 2nd.

Create signs and poles from sheet metal using various methods of fabrication and metal cutting equipment. This includes but is not limited to: shears, CNC, drill press, various metal cutters, and routers. Also, weld pieces of material together by using either MIG or TIG welding. Will also grind welds, pieces, or shear edges with power grinder.

Powder Coater/Painter

Pardeeville

$16.33/hr-$16.58/hr

1st: 5:45am - 2:15pm (M-Th) 2nd: 3pm – 1:30am (M-Th)

• Spray powder paint to industry standards • Prep, hang, and unload parts

Crate Shipper

Pardeeville

$16.33/hr-$16.58/hr

1st: 5am – 3pm (M-Th) 2nd: 3pm – 1:30 am (OT until 2:30am)

• Safely load and transport items by hand or with power equipment • Load and unload trucks and trailers as well as operate scales and part id equipment.

Quality Assurance

Monroe, WI

$15/hr-$16/hr

1st: 5am – 3pm (some flexibility)

This position is responsible for performing quality audits on packaging lines to assure that products and packaging meet established quality standards and personnel are following protocols. Other responsibilities include laboratory testing of raw and finished products for chemical analysis on product that is processed through the facility. Participation and understanding of food safety programs, their corrective action, and documentation is essential.

Builder

Oregon, WI

Based on experience

1st: 6am – 4:30pm (M-Th)

The primary purpose of this job is to perform all building related tasks including, but not limited to: framing, insulating, installing roof systems, and doing trim work. • Must be willing to work overtime, as needed • Primarily indoor work

Material Handler

Oregon, WI

Based on experience

1st: 6am – 4:30pm (M-Th) OT on Friday: 6am – 4:30pm

The materials clerk coordinates and manages stock and inventory procurement on a daily basis. • Receive, put away and turn in packing slips for all deliveries • Retrieve and stage materials for jobs, returns and/or service

Sanitation Technician

Watertown

$18.30--$20.42/hr

2nd Shift: 5:00pm–-1:30am (Overtime as production demands including possible weekends.)

You’ll learn about a variety of Sanitation processes, expanding your existing knowledge for application into the business of making sausage. There is unlimited opportunity for growth as you become an active contributor to the Sanitation Team and assist your team in the quest for continual improvement.

Harvest Line

Watertown

$15, then $17.21 once hired on.

1st Shift: time is staggered throughout dept ranging from start time of 5:30--5:45am. The end time will vary depending on production needs (around 2 pm). Overtime expected and required.

You’ll learn about a variety of Harvest processes, expanding your existing knowledge for application into the business of making sausage. There is unlimited opportunity for growth as you become an active contributor to the Harvest Team and assist your team in the quest for continual improvement.

General Fabrication

DeForest, WI

$16/hr-$18/hr

M-Th: 3:55pm -- 2:25am

Responsible for the fabrication of sheet metal products to customer specifications assuring that Pro Metal Work’s products and services meet or exceed customer expectations.

Press Line Operator

Johnson Creek

$15.75-$16.77/hr

1st shift: 8am – 4pm 2nd shift: 4pm – 12am 3rd shift: 12am – 8am Rutil/Desma Press Operator: 2nd shift = ($15.60) 3rd = ($15.75/hr.) Rep Operator: 2nd shift = ($16.62) 3rd shift = ($16.77/hr.)

While performing the duties of this job, the employees frequently works near moving mechanical parts and is frequently exposed to risk of electrical shock. The employee occasionally works in high, precarious places and inside and outside weather conditions and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles and vibration. The temperature in the factory may vary from 70 degrees Fahrenheit during the winter to 110 degrees Fahrenheit during the summer. Employees may get dirty with grease and oil. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Packager

Johnson Creek

$13.25/hr-$13.40/hr

2nd shift: 4pm – 12am ($13.25) 3rd shift: 12am – 8am ($13.40)

While performing the duties of this job, the employee frequently works near moving mechanical parts and is frequently exposed to risk of electrical shock. The employee occasionally works in high, precarious places and inside and outside weather conditions and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles and vibration. The temperature in the factory may vary from 70 degrees Fahrenheit during the winter to 110 degrees Fahrenheit during the summer. Employees may get dirty with grease and oil. The noise level in the work environment is usually moderate and occasionally loud. While performing the duties of this job, employee is regularly required to use hands to finger, handle, or feel objects, tools or controls and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit, climb or balance, and smell. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds and occasionally lift and/or move more than 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

Robotic Welder

Ixonia, WI

$16/hr-$22/hr

1st: 6am – 2pm (M-F) 2nd: 2pm – 12am (M-Th)

Ensure that product processed with robotic welds meet the specifications of the customer and is prepared as needed for additional processes.

Welder

Ixonia

$16/hr-$22/hr

1st: 6am – 2pm (M-F) 2nd: 2pm – 12am (M-Th)

Ensure that product processed with manual MIG welds meets the specifications of the customer.

Punch Press Operator - Ixonia

Ixonia, WI

$17/hr-$19/hr

2nd: 2pm – 12am (M-Th)

Class C Operator • Operate manual part in part out mechanical stamping punch presses. • Review shop orders, work instructions, blueprints, and inspection records in order to produce quality parts. • Examine and measure product to verify conformance to specifications using measurement equipment as specified on inspection records. • Comply with policies, processes, and systems of the ISO quality management system. • Support the commitment to a safe work environment as stated in the safety vision and the safety manual. Class B Operator • Perform duties listed above under class C operator • Set up and adjust manual part in part out dies. • Able to run coil fed blank and progressive dies. Class A Operator • Perform duties listed above under class B and C operator • Able to set up and run all die types (part in part out, progressive, blanking, and transfer line) • Troubleshoot die/machine issues as needed. • Assist in training new employees. While performing the essential duties of this job, the role requires working in the shop which means: • Exposure to fumes or airborne particles. • Forklift traffic. • Near moving mechanical parts • Exposure to loud noise levels • Exposure to electromagnetic interference environment.

De-nester (Fabrication)

Ixonia

$17/hr+

2nd: 2pm – 12am (M-Th)

To pull laser cut parts from nest, deoxidize, and measure per work instructions.

Brake Press

Ixonia

$17+/hr

1st: 6am – 2pm (M-F) 2nd: 2pm – 12am (M-Th)

Ensure that product processed from press brakes meets the specifications of the customer.

Machine Operator

Madison

$14/hr-$15/hr

2nd shift: 3pm-11pm-$15/hr 3rd shift: 11pm-7am-$15/hr

Operate machines, deburr parts as instructed and monitor the quality of designated features.

Production Operator - Orangeville, IL

Orangeville, IL

$14.50/hr increases when hired in.

Two Shifts available: 5am – 5pm 5pm – 5am (Rotating. 3 on 3 off/4 on 4 off.)

Work in a team or autonomously to provide production and sanitation support. Maintain cleanliness of work areas to facility standards. Work on packaging line to maintain efficiency of product timelines. Comply with all safety standards and regulations provided by the company and government. Ability to work in all assigned areas of production; perform relief duties when required. Ensure that the Master Sanitation Schedule as well as environmental cleaning is consistently completed. Ensure that all documentation is completed and verified daily. Ensure all equipment and facility is properly cleaned per plant procedures and requirements. Work effectively as part of a team and display a positive attitude. Be cooperative and take initiative to ensure smooth operations. Perform other duties/projects as apparent or assigned.

Polisher

Lodi, WI

$20/hr-$23/hr

1st Shift

Responsible for grinding and polishing stainless steel work pieces according to specifications. Polish and grind parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools as needed.

TIG Welder - Lodi, WI

Lodi, WI

$23/hr-$27/hr

1st Shift

Given below is a TIG welder job description, which highlights the major tasks, duties, and responsibilities of the role: - Oversee the selection and procurement of materials and equipment required for TIG welding - Measure and align workpieces using straightedges, clamps, and calipers - Ensure compliance with established health/safety policies and regulations - Carry out preventative maintenance and repair of piping systems and metal structures - Ensure welding operations meet set specifications and construction requirements - Oversee the training and mentoring of new and trainee TIG welders - Perform TIG welding on materials such as fiberglass, iron, plastic, and copper - Conduct radiographic and bend tests to verify the quality of weld.

Machinist - Lodi, WI

Lodi, WI

$20/hr-$25/hr

1st Shift

Operate machines and shop tools--drill press, saws, punch press, lathe, vertical milling machine, surface grinder, broacher, and other hand tools. Perform minor die repairs. Use precision measuring and gauging tools--micrometer, and calipers to perform inspection before you start a job and at completion. Assist the lower classification machinist as needed. Grease equipment per machine specifications. Assist pipe fitter trainees and pipe fitter B with duties.

Electrical Panel Wiring Technician - Lodi, WI

Lodi

$20/hr-$25/hr

1st Shift

Read and interpret drawings and cutting lists as required to assemble and wire electrical components. Route and connect pneumatic tubing to pneumatic devices. Perform calibration of electrical components.

Material Handler

Oregon WI

Based on Experience

1st: 6am – 4:30pm (M-Th) OT on Friday: 6am – 4:30pm

The materials clerk coordinates and manages stock and inventory procurement on a daily basis. • Receive, put away and turn in packing slips for all deliveries • Retrieve and stage materials for jobs, returns and/or service

Electrical Control Panel Wiring Technician

Oshkosh, WI

$22.00/hr

1st and 2nd shifts. Shift premium on 2nd shift.

Seeking an Electrical Controls Panel Wiring Technician to join our team. · Build and assemble electrical control panels and doors. Cut, prep and terminate control wiring LV connections. · Wire all control type components, CT's, relays, meters, contacts, breakers 86 and 52, heaters, test switches, terminal/shorting blocks, lights, etc. · Verify components with the bill of materials to ensure accuracy. · Install electrical components per assembly drawings. · Operate a computer terminal to look up drawings and diagrams. · Wear appropriate safety gear at all times. · Maintain control of the tools provided to you and ensure that your company issued tool box is inventoried daily and locked up when not in use. · Maintain a high attention to detail and strive for a "Zero Error Build".

Electrical Engineer

Oshkosh

$50 to $75K depending on experience

1st

Research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. This position will ensure that the design criteria meet the objectives which relate to quality, cost, manufacturing, service, and schedule.

Electrical Designer

Fond du Lac, WI

$49/k-$100/k DOE

Seeking and Electrical Controls Designer ideally with strong AutoCAD Electrical skills. This position is responsible for the electrical engineering of machinery and electrical systems, including machine program software. Will work as part of a team to conceptualize, design and program controls systems for custom equipment.

Electrical Field Service Technician

Fond du Lac, WI

$25.00-$28.00/hr DOE

Seeking an experienced Electrical/Mechanical Service Technician. This position is responsible for a mixture of work in the shop, as well as daily or overnight travel to customer sites to perform a wide variety of highly technical duties including start-up and repair of complex and sophisticated electronic and mechanical equipment. Employees work independently or as a team installing, servicing or repairing electrical control and mechanical equipment. Approximately 50% travel is required.

Industrial Spray Painter

Neenah, WI

$18.00-$24.00/hr depending on experience

1st shift

In search of and Industrial Spray Painter to join our team. Spray Painters prepare all surfaces before spraying, select and mix the coating liquids, and expertly spray each layer to ensure an even coating.

MIG/TIG Welder

Neenah, WI

$18.00-$30.00 depending on experience

1st shift - 10 hour days Monday-Thursday, OT on Friday mornings

Seeking an experienced Welder/Fabricator who is proficient in both MIG and TIG welding. This position is responsible for the precision alignment and welding of material handling equipment and related mechanical equipment.

TIG Welders

Neenah, WI

DOE

1st, 2nd, 3rd

Seeking TIG Welders/Fabricators · Fabricate parts if required. Must be able to work from a print and written instructions · Measure, cut, grind precisely lay-up jobs and deliver a quality weld that is also aesthetically pleasing. · Maintains safe operations by adhering to safety procedures and regulations

Shop Assistant

Green Bay, WI

Seeking eager, physically fit shop helpers to work in the Fabrication or Machining departments.

Shuttle Driver-Class "A" CDL

Appleton, WI

DOE

2nd

We are seeking a licensed CDL, Class A, Shuttle Driver to pick up and deliver customer tractors, trailers, and parts as needed. Some travel will be between Milwaukee and Madison.

Mechanical Field Service Technician

Oshkosh, WI

DOE

We are seeking a Mechanical Field Service Technician to work on the installation and commissioning of Power Distribution Equipment. • Installation, commissioning, inspecting, modifications and troubleshooting as well as factory testing and quality control. • A technician should have a good working background, likes working with his or her hands, using hand tools, using mechanical equipment, and one that does not mind moderate physical working activity. • Primarily Medium Voltage Switch Gears. • This is primarily Mechanical but Electrical is a definite plus!!! • Must have at least a year + of some related mechanical field service.

Electrical Assembler

Oshkosh, WI

DOE

1st shift Monday - Friday, 2nd shift Monday - Thursday, 8% premium for 2nd shift

We are seeking experienced, reliable Panel Wiring Technicians to wire control panels. Ideally looking for experienced individuals that know what they are doing and can work with minimal direction. This is not an electrician position, wiring is done point to point. Instructions come from an Excel spread sheet. -Plan, layout, wire electrical components, assembles sub-assemblies and assemblies of electrical and mechanical components on a non-repetitive basis to build units -Reads and wires from point to point

Mechanical Assemblers

Oshkosh, WI

DOE

1st shift Mon-Fri, 2nd shift Mon-Thurs, 8% premium on 2nd shift

We are seeking Mechanical Assemblers to assist in the assembly of large control panels. · Installation of busses and other components inside large control panels · Some of the components weigh from 50 to 70 pounds, must be physically able and comfortable lifting these components -Will work from prints and 3-D drawings -Will take direction from the primary assemblers

MIG Welder

Oshkosh, WI

$18.00-$25.00/hr depending on experience

2nd-8% premium on 2nd shift

We are seeking a MIG Welder to work on the welding of enclosures and related components. Performs all forms of welding with emphasis placed on gas welding of materials such as mild steel, Galvanized Steel, Stainless Steel, and Aluminum. -Will work from prints -Fabrication will include tacking the frames -Layout and set-up weld jobs from walls to finished cabinet -Read and follow piece part and assembly drawings -Perform work involving close tolerances that require constant attention while making adjustments to perform properly in a timely manner

Estimator

Appleton

DOE

1st

We are seeking an Estimator responsible for performing material take off duties for piping projects while ensuring all customer material requirements and specifications are followed.

Mechanical Drafter/Checker

Appleton

DOE

1st

We are seeking a Mechanical Drafter/Checker responsible for performing checking duties for piping projects while ensuring all project requirements, industry standards and fabrication codes are adhered to.

Mechanical Designer/Drafter

Appleton

DOE

1st

We are seeking a Mechanical Designer/Drafter that has piping experience. This position is responsible for performing drafting duties for piping projects incorporating the applicable details and project related requirements to shop fabrication drawings.

Forklift Operator

Seeking a Forklift Operator who will be responsible for the supply and removal of materials to the machinery or department. Additional will be responsible for the staging and ensuring material or product is stored correctly.

Forklift Drive

Appleton, WI

$14.00-$17.00/hr DOE

2nd Shift

The Forklift Driver is responsible for the supply and removal of materials to the machinery or department. In addition, they are responsible for the staging and ensuring material or product is stored correctly.

Maintenance Technician

Appleton, WI

$20.00 to $25.00/hr based on experience

1st & 2nd

Perform work involving the skills of two or more maintenance or craft occupations to keep machines, mechanical equipment, or the structure of an establishment in repair. Duties may involve pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.

Mechanical Assemblers

Oshkosh, WI

DOE

1st

We are seeking experienced Mechanical Assemblers • This position is responsible for the assembly of components and sub-assemblies of metal parts according to prints.

Material Handler

Appleton

$16/hr

Monday - Friday 5am-1pm. Overtime on Saturdays when needed.

We are seeking a reliable Material Handler that has some experience in warehouse activities as well as material handling.

Shipping & Receiving

Green Bay, WI

$15.00 - $19.00/hr DOE

1st

Duties include but are not limited to: -Receive and unload freight both manually or with the forklift -Check for damaged goods -Verifies quantity and quality of the order -Verify items received with purchase order -Wraps, packages and ship supplies -Work with internal department to move orders around the shop -Work with Customers and Vendors

Welder/Fabricator TIG

Green Bay, WI

$16.00 - $21.00/hr DOE

1st

Seeking a skilled TIG Welder/Fabricator to join our team in our custom metal fabrication shop. Work will primarily be TIG with some fabrication, as well as polishing and grinding on stainless steel and aluminum. Our emphasis is on Quality!! -Food grade experience is beneficial -Will work from blueprints

Parts Puller

Green Bay, WI

$14.00 - $17.00/hr DOE

1st and 2nd

Seeking a motivated, reliable individual for a Parts Puller position in our custom metal fabrication shop. This position will operate small hand tools such as grinders, buffers, and sanders.

Painter

Green Bay, WI

$16.00 to $20.00/hr DOE

1st

Looking for a motivated individual to join our team. We are looking for a long term employee. Looking to get into a trade? This may be the start for you. This position will be spraying primer, no finish coat, not shot blast, onto specified items.

Softscape Crew Member

Appleton, WI

$15.00 - $18.00/hr DOE

1st

Softscape Crew Members are responsible for working in a team environment to complete successful installations of landscaping projects. This position requires strong customer service experience, a high level of physical stamina, and strong decision-making skills. -Complete the installation of landscape designs -Ensure all equipment is used and maintained properly -Assist in maintaining a clean work environment including breakrooms, bathrooms, and community spaces

General Labor

Green Bay, WI

$14.00 to $16.00/hr DOE + production bonus paid weekly

1st Shift

This position assists in pallet making from start to finish. There is a large array of duties for the person in this position including but not limited to, using components to build pallets, repairing pallets and creating pallet components. While performing the duties of this job, the employee is regularly exposed to vibration. The employee occasionally works near moving mechanical parts and in high, precarious places. The noise level in the work environment is usually very loud.

Maintenance Technician

Green Bay, WI

$20.00 to $25.00/hr DOE

2nd shift

In need of a Maintenance Technician to join our team. This position will perform highly diversified duties to install and maintain production machines and the plant facility's equipment. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.

CNC Operator

Green Bay, WI

$18.00-$22.00/hr DOE

2nd shift, Monday - Thursday, 10/hrs each day

In need of a CNC Operator to join our team. -Promote a safe working environment. Identify and demonstrate use of machine safety and personal protection equipment. Demonstrate compliance with safety procedures, OSHA requirements and guidelines. -Responsible for assigned production duties issues associated with product manufacturing. Operate assigned machine tool(s) to meet the requirements of company component manufacturing. -Perform assigned duties in a timely fashion, or time allotted. -Check product design and specifications for compatibility with manufacturing capabilities. -Recommend changes in design or specifications as needed to reduce cost, add value, increase manufacturing efficiency or improve performance. Assist with warranty or complaint issues, by providing solutions or rework options. -Willingness to perform general housekeeping and maintenance associated with work area.

Press Brake Operator

Manitowoc, WI

Based on Experience

2nd shift - training on 1st shift

In need of a Press Brake Operator who will also know or have the desire to learn other machine positions in the shop.

General Labor

Green Bay, WI

$20.00/hr

1st shift - 8 to 12 hour days, will vary from day to day

This is an entry level position that is physically demanding, but there is opportunity to grow and train within the company. Responsibilities for this position include but are not limited to: -Handling of parts -Deliveries -Shop maintenance -Assist senior employees on jobs as needed

Saw Operator

De Pere, WI

$18.00-$21.00/hr DOE

1st shift

Saw Operator is responsible for the cutting of structural materials, creating cutting schedules, verification of cut-list, materials, and tooling, provide training, follow up with nonconformance's, logging of labor and material usage, and completion of work order in ERP system. -Perform other jobs as assigned by management

Dairy Service Technician

Green Bay, WI

$18.00-$25.00/hr Based on Experience

1st shift; however occasional evenings and weekends as needed

In need of a motivated, self-starter who can work independently, yet function and participate as part of a team. A Dairy Service Technician is responsible for meeting the dairy customer's needs in the proper troubleshooting, servicing and repairing of dairy equipment. -Diagnose, service and/or repair dairy equipment effectively and efficiently -Maintain high levels of customer satisfaction -Advise customers on the proper use, operation and maintenance of dairy equipment -Drive a sales/service vehicle, and maintain the vehicle and parts/tools to complete job

Mechanical Assembler

Green Bay, WI

$18.00-$25.00/hr Based on Experience

1st or 2nd

In need of Mechanical Assemblers with experience in a custom machinery setting. We are a growing custom machine builder working in diverse markets. Ideal candidates will have: -Handle and set up large parts -Interpret blueprints; and work independently -Apply continuous learning and innovation to improve team and company productivity, throughput, and communications -Finish operations, including grinding, polishing, sanding, and deburring -Be flexible in meeting customers' changing requirements

Welder-Fabricator

Green Bay, WI

$20.00-$28.00/hr Based on Experience

2nd shift - 4 day work week

Seeking a Welder/Fabricator to work in our custom machinery shop. This is not just a welding position, you will work from prints but will need to do the finishing work as well. As this is a custom shop you could be working on something new each day. -Welders must have the ability to read and follow instructions of fabrication prints used to construct components/weldments -Read and understand welding symbols -Straighten weldments for machining

Machine Operator

Green Bay, WI

Based on Experience

Swing

This position is responsible for the operation of a carded non-woven line as a member of the operating crew. This position is to ensure the timely and accurate completion of customer orders in compliance with all safety, quality, and cost and productivity guidelines.

Machine Operator

Appleton, WI

$14.00 to $18.00/hr based on experience

1st shift

-Build and dismantle pallets -Sort pallet components -Operate all pallet manufacturing facility tools-saws, nail guns, pallet jacks, hand tools) and equipment in a safe manner -Wear all personal protective equipment required -Sort and stack pallets according to customers' requirements Operate forklift after OSHA required training is completed -Keep daily log of work done to turn into shift supervisor at end of each shift -Other duties as assigned

CNC Machine Operators

Fond du Lac, WI

Based on experience

1st and 2nd

Produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. -Plans machining by studying work orders, blueprints, specifications, and machining parameters; interpreting geometric dimensions and tolerances -Programs machine by entering instructions, including zero and reference points, offsets, and compensation; calculating requirements, including basic math, geometry and trigonometry, proving part programs -Maintains specifications by observing grinding operations; taking measurements with calipers, micrometers and optical comparators; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening worn tools; adhering to quality assurance procedures and processes -Performs other duties as required

Paint Line Technician

Kiel, WI

$17.00/hr + $3.00/hr shift differential

1st Shift-weekend

-Loads and unloads parts from the overhead conveyor production line -Inspects for great quality to please the customer -Completes rework when necessary -Works as a teammate to complete customer orders -Powder coat and assemble quality parts -Problem solve effectively -Communicate with team as a whole to get the day to day tasks complete -Safely run equipment with the proper PPE

Manufacturing Technician-Fabricator

Kiel, WI

$17.00/hr + $3.00/hr shift differential

1st-weekend

Manufacturing Technicians are cross-trained to set-up, program and operate CNC lasers, turret punches and press brakes. In addition, Fabricators perform welding functions. Fabricators are also trained to read and interpret blueprints, use measuring equipment, perform quality inspections and use effective work flow skills. ***We will train - no manufacturing experience is required***

Shipping & Receiving Clerk

Green Bay, WI

$15.00-$19.00/hr DOE

1st Shift, 7:00 am to 4:00 pm

Shipping & Receiving Clerk Duties include but not limited to; • Receive and unload freight both manually or with forklift • Checks for damaged goods • Verifies quantity and quality of order • Verify items received with purchase order • Wraps, packages and ship supplies • Works with internal department to move orders around shop • Works with Customers and Vendors • Other duties as assigned

Welders

Green Bay, WI

$15:00-$21.00/hr DOE

1st and 2nd Shifts

We are looking for skilled and motivated Welders/Fabricators to fabricate and weld using MIG (Hard core) within the job shop environment. This is not just welding, must be able to assemble and fabricate from blueprints with quality, blended welds. Weld test is required at the interview, must bring gear. -100% MIG welding -Fabrication of parts -Mild to Stainless steel and everything in between -Will work from prints to fabricate and weld components and equipment

Quality Assurance Inspector

Green Bay, WI

$16.00-$17.00/hr DOE

1st Shift

Inspects, documents, photographs and when required, polishes finished item to ensure compliance with company stated specifications. Works directly with the Laser operation section as a verification point for consistency of completed work. -Operates forklifts, overhead cranes in the lifting/ moving of anilox rolls -Keeps work area clean, organized and functional -Observes and follows all safety procedures while using appropriate safety equipment -Determine that customer specifications have been precisely carried out on every product that is shipped -Determine any flaws in workmanship or deviations from specifications and notify supervisor -Other duties when necessary, as specified by management

Plasma Operator

De Pere, WI

DOE

1st Shift

This position involves setting up anilox rolls for metallic coatings created by a plasma flame spray process according to specifications. Performs periodic maintenance requirements of equipment. -Set up and maintain equipment parameters -Use micrometers and tape measure -Use a computer controlled plasma unit -Verifies that sprayed roll conforms to specifications

Product Packer

Green Bay, WI

$14.00/hr DOE

Rotating-2 week cycle starting on 1st shift and then going to 2nd shift, back to 1st shift, etc.

Product Packers assemble cartons prior to packing and pack finished product into designed cartons. Specification worksheets will be used to ensure customer requirements are being met. Quality checks will be performed and will work with the Machine Operator and Quality Control to ensure the customer is receiving the best quality product available -Pull samples from finished products for quality inspections -Record daily log sheets for production -Weigh bins of scrap -React to change productively and handle other assigned tasks

Machine Operator

Green Bay, WI

$18.00-$20.00/hr DOE

Rotating: Monday-Thursday, 5:00am-3:00pm for two weeks, 3:00pm-1:00am for two weeks

Set-up and operate machines for production. -Use specification worksheets to ensure customer requirements are being met -Complete hourly quality samples -Strive to meet or exceed machine speed targets set forth on the specification worksheets -Keep machines clean and in good working order -Notify Supervisor of any maintenance needed -Maintain operating hardware to ensure it's in good working condition -Perform low-end maintenance on machines -Must be able to react to change productively and to handle other tasks assigned

Welder-Fitter

Green Bay, WI

$21.00-$25.00/hr DOE

1st Shift

This position operates various pieces of equipment to fabricate materials per customer specifications in conjunction with quality requirements, safety standards and manufacturing philosophies within a team environment. Responsible for various types of weld preparation, welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction.

Industrial Painter

DePere, WI

$16.00/hr to $20.00/hr DOE

2nd Shift

The Industrial Painter is responsible for assisting others in the preparation of parts for paint as well as the process of operating paint guns to paint surfaces of industrial, commercial, or military equipment such as trucks, trailers, axles or other smaller pieces of industrial equipment.

Paint Prep

DePere, WI

DOE

1st and 2nd

Prepare products for blast, prime or paint, etc. by: -blow off sand or debris -tape or plug areas that do not require blast, prime or paint -transport to proper locations and set up in bay -take product down -look over and touch up light or missed areas -put on pallets -wrap or band product for shipment

Order Puller

Green Bay

$14.00/hr

1st and 2nd

Pull boxed product from warehouse to fulfill customer orders. Must have the ability to accurately count and review customer orders for accuracy. Must be able to operate powered equipment such as: Forklift or Electric Pallet Jack.

Electroplater

Green Bay

$13.00/hr to $15.00/hr DOE

Train on 1st and then move to second shift when training is complete.

Perform electroplating operations to surface parts and materials with hexavalent chromium.

Welders

Green Bay

$16.00 per hour to $24.00 per hour Depending on experience

1st

This position operates various pieces of equipment to fabricate materials per customer specifications in conjunction with quality requirements, safety standards and manufacturing philosophies within a team environment. Responsible for various types of weld preparation, welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction.

Mechanical Assembler

Appleton

$17-25/hour

1st Shift: 6 AM - 4:30 PM, Monday - Thursday

Do you have previous mechanical assembly experience in an OEM environment? Do you have a strong history of reliability and want to be part of something bigger than yourself? Apply today! You will be responsible for constructing machinery in the mattress/foam industry. Candidate swill work off prints and drawings to assist in building their machines from start to finish. * MUST HAVE A VALID DRIVER'S LICENSE AND RELIABLE TRANSPORATION

Entry Level Recruiter / Admin

Racine, WI

$17.00 plus commission (when up and running $28/hr. within a year)

1st shift (8am - 4:30pm)

Recruit, post jobs, data entry, and payroll.

Blending Operator

Racine

$18/hr

1st

We would like any candidate to be aware that if they have a beard it will have to be clean shave in some areas in order for a respirator to fully secure to the face when needed. Please take in mind that the job description describes the position is physical labor, including frequent lifting of 50# bags, and stacking of 50# bags to a height of up to 6 feet.

Food Scientist

Racine

60,000/yr

1st

This position would require product development, but not focused on finished goods that are ready for consumption. We use enzyme modification, etc.

Light Industrial Assembly - Electrical

Mount Pleasant, WI

$18.15

2nd Shift 3:30pm to 12:00am

Light electrical Assembly.

Electrical Assembler

Mount Pleasant

$18/hr

2nd

CNC

Racine, WI

Based on experience

Open

Back To Top